Product Application/Dilution Listing
|
In-Bay Automatic / Low Pressure Pre-Soak: One Step See KCC for application guidelines; dilution ratio's vary depending on the type of In-Bay automatic you are operating. |
In-Bay Automatic / Low Pressure Pre-Soak: Two Step See KCC for application guidelines; dilution ratio's vary depending on the type of In-Bay automatic you are operating. |
Conveyor / Cleaning Products Dilution ratio is 100:1 to 300:1 depending on application. Designed for Hand Wash applications. |
|
Conveyor / Cleaning Products Apply in prep area or prior to pre-soak arch through a low volume applicator. Dwell Time/Ratio:
|
Conveyor / Extra Service Products RTU (Ready to use) |
Self-Serve RTU (Ready to use) |
|
Conveyor / Specialty Products Dilution ratio: 3:1 or as needed. Apply with manual sprayer, then scrub with brush. Rinse after 60 seconds for walls. Do not allow to dry before rinsing. Wear splash goggles & protective gloves. Contact Kaady Chemical for guidelines and further product information. |
Self-Serve Dilution ratio: 3:1 or as needed. Apply with manual sprayer, then scrub with brush. Rinse after 60 seconds for walls. Do not allow to dry before rinsing. Wear splash goggles & protective gloves. Contact Kaady Chemical for guidelines and further product information. |
Conveyor / Drying Products Draw directly from container; apply 1/2 oz. to 1 oz. per application. Apply automatically through application arch. Self-Serve Operations: dilute 64:1 to 75:1. |
|
Self-Serve Draw directly from container; apply 1/2 oz. to 1 oz. per application. Apply automatically through application arch. Self-Serve Operations: dilute 64:1 to 75:1. |
In-Bay Automatic / Clear Coat Sealant Draw directly from container; apply 1/2 oz. to 1 oz. per application. Apply automatically through application arch. Self-Serve Operations: dilute 64:1 to 75:1. |
Self-Serve Through foaming type brush, dilution range is 64:1 to 90:1. |
|
Conveyor / Specialty Products Application: Dilution: |
Conveyor / Cleaning Products
|
Conveyor / Cleaning Products Designed for use in; Prep Pans, Soap Foamers and for lubricating cloth components. Dilution Ratio; 90:1 to 300:1 depending on application. |
|
Conveyor / Cleaning Products Prep Gun or Manual Brush / Mop application:
|
Conveyor / Extra Service Products Apply at low pressure. Application Ratio: 120:1/300:1 |
Self-Serve Apply at low pressure. Application Ratio: 120:1/300:1 |
|
In-Bay Automatic / Liquid Polish Apply at low pressure. Application Ratio: 120:1/300:1 |
In-Bay Automatic / Low Pressure Pre-Soak: Two Step See KCC for application guidelines; dilution ratio's vary on the type of In-Bay automatic you are operating. |
NOIL For hydraulic units operating up to 2000 PSI. Clean unit completely and purge hyd. lines before adding NØIL. Contact Kaady Chemical for conversion info. Keep NØIL level high in tank; this will assist in minimizing heat within system. Kaady Chemical recommends installation of the Automatic In-Line Cooling System. Request E.P.R. or Viton seals in your pump and motors; use hydraulic hose that is rated for water-based products. Contact Kaady Chemical for guidelines and information. |
|
Conveyor / Specialty Products Contact Kaady Chemical for application guidelines. Product usage is dependent upon reclaim pit size. |
Conveyor / Paint & Wheel Protection Apply through arch after Rapid Dry. Draw directly from container; Apply 1/2 oz. to 3/4 oz. of concentrated product. |
In-Bay Automatic / Extra Service Products Apply through arch after Rapid Dry. Draw directly from container; Apply 1/2 oz. to 3/4 oz. of concentrated product. |
|
Conveyor / Drying Products Apply through arch after final rinse. Draw directly from container, using 1/2 oz. to 1 oz. of concentrated product. Contact Kaady Chemical on dilution ratio guidelines. Ratios may change depending on: equipment layout, conveyor speeds, extreme temperatures and geographical area. |
In-Bay Automatic / Drying Agent Apply through arch after final rinse. Draw directly from container, using 1/2 oz. to 1 oz. of concentrated product. Contact Kaady Chemical on dilution ratio guidelines. Ratios may change depending on: equipment layout, conveyor speeds, extreme temperatures and geographical area. |
Conveyor / Extra Service Products Draw directly from container; apply 1/4 oz. to 1/2 oz. per application. Apply formula automatically through an under-carriage manifold. |
|
In-Bay Automatic / Extra Service Products Draw directly from container; apply 1/4 oz. to 1/2 oz. per application. Apply formula automatically through an under-carriage manifold. |
Self-Serve Apply through gun at low pressure. Dwell Time/Ratio:
|
Self-Serve Apply through gun at high pressure. Dwell Time/Ratio:
|
|
Conveyor / Extra Service Products Apply a fine, even coat of Tire Shine using a clean, soft cloth or sponge, or spray directly onto a clean surface. Remove any overspray or drips on painted surfaces or windows, with soap and water. |
Conveyor / Cleaning Products For use in automatic applications of: tires, wheels, pre-soak arches, soap foamers, mitter curtains, wrap arounds and side washers. Wheel Application Ratios: (For best results, apply to dry tire and wheel. Increased residence time will also improve performance.)
*Note: At 4:1 ratio, remove product within 15 seconds if above 80 degrees to avoid product drying on wheels. Pre-Soak Arches and Soap Foamer Ratios
Mitters, Wrap Arounds and Side Washers:
|
Conveyor / Paint & Wheel Protection Apply 1/8 of an oz per wheel |
